 | Tapholders diam.19/1 with clutch M2-M16 (unit) |
 | Tapholders diam.19/1 without clutch M3-M16 (unit) |
 | Dieholder M5-M12 19/1 (unit/size) |
 | Long dieholder M6-M12 19/1 (unit/size) |
 | Quick change extension |
 | Reducer cup 19-13 |
 | Clamp |
 | Clamp |
 | Table 500x500 |
 | Table 700x700 |
| | Table 850x850 |
 | Table 1100x850 |
 | Trolley |
 | Column |
 | Pneumatic lifter |
| | Mechanic lifter |
 | Magnetic support (150x150) |
 | Magnetic support (Ø200) |
| | Magnetic support (Ø250) |
 | Arm extension support (1 m.) |
This machine consists of a pendular parallelogram that is balanced by a pneumatic spring, plus a radial arm. The gas spring and radial arm assembly fixes the motor head and keeps it perpendicular to the working area. The motor is equipped with a quick-change system and is rotated by compressed air that has previously been filtered and lubricated by a unit for that purpose. Taps and shank tooling fit to the motor's quick-change system by means of tapholders.
| | Tapholders diam.19/1 with clutch M2-M16 (unit) |
| | Tapholders diam.19/1 without clutch M3-M16 (unit) |
| | Dieholder M5-M12 19/1 (unit/size) |
| | Long dieholder M6-M12 19/1 (unit/size) |
| | Quick change extension |
| | Reducer cup 19-13 |
| | Clamp |
| | Clamp |
| | Table 500x500 |
| | Table 700x700 |
| | Table 850x850 |
| | Table 1100x850 |
| | Trolley |
| | Column |
| | Pneumatic lifter |
| | Mechanic lifter |
| | Magnetic support (150x150) |
| | Magnetic support (Ø200) |
| | Magnetic support (Ø250) |
| | Arm extension support (1 m.) |
The ROSCAMAT 200 can be equipped with any motor TSVII. Each of them has a different speed, and also a different thread capacity.
Motor TS-VII | Max. speed | Max. torque | Coupling diametre | Max. thread | Max. thread |
202A0100 | 350 | 30 | Ø 19 | M14 | M16 |
202B0100 | 750 | 17 | Ø 19 | M10 | M12 |
| | Tapholders diam.19/1 with clutch M2-M16 (unit) |
| | Tapholders diam.19/1 without clutch M3-M16 (unit) |
| | Dieholder M5-M12 19/1 (unit/size) |
| | Long dieholder M6-M12 19/1 (unit/size) |
| | Quick change extension |
| | Reducer cup 19-13 |
| | Clamp |
| | Clamp |
| | Table 500x500 |
| | Table 700x700 |
| | Table 850x850 |
| | Table 1100x850 |
| | Trolley |
| | Column |
| | Pneumatic lifter |
| | Mechanic lifter |
| | Magnetic support (150x150) |
| | Magnetic support (Ø200) |
| | Magnetic support (Ø250) |
| | Arm extension support (1 m.) |
The ROSCAMAT 200 can be supplied with an articulated head. This bracket of easy handling can be set in four different positions 90º apart.
| | Tapholders diam.19/1 with clutch M2-M16 (unit) |
| | Tapholders diam.19/1 without clutch M3-M16 (unit) |
| | Dieholder M5-M12 19/1 (unit/size) |
| | Long dieholder M6-M12 19/1 (unit/size) |
| | Quick change extension |
| | Reducer cup 19-13 |
| | Clamp |
| | Clamp |
| | Table 500x500 |
| | Table 700x700 |
| | Table 850x850 |
| | Table 1100x850 |
| | Trolley |
| | Column |
| | Pneumatic lifter |
| | Mechanic lifter |
| | Magnetic support (150x150) |
| | Magnetic support (Ø200) |
| | Magnetic support (Ø250) |
| | Arm extension support (1 m.) |
Roscamat 200: Radius: 935 mm / High: 530 + 130 mm
Roscamat 200 VH: Radius: 1020 mm / High: 530 + 130 mm
| | Tapholders diam.19/1 with clutch M2-M16 (unit) |
| | Tapholders diam.19/1 without clutch M3-M16 (unit) |
| | Dieholder M5-M12 19/1 (unit/size) |
| | Long dieholder M6-M12 19/1 (unit/size) |
| | Quick change extension |
| | Reducer cup 19-13 |
| | Clamp |
| | Clamp |
| | Table 500x500 |
| | Table 700x700 |
| | Table 850x850 |
| | Table 1100x850 |
| | Trolley |
| | Column |
| | Pneumatic lifter |
| | Mechanic lifter |
| | Magnetic support (150x150) |
| | Magnetic support (Ø200) |
| | Magnetic support (Ø250) |
| | Arm extension support (1 m.) |
A wide range of tapholders, all of them with clutch and without it, apart from other quick holding fixtures for different tools, such as drills, sinking tools, threading dies, socket wrenches, etc are available. · Toolholder with safety clutch: (so that it slips when it reaches the hole bottom) Type-1 Ø 19 capacity range M2-M16 · Toolholder without clutch: (for holding different tools with a cylindrical shank and driving cube) Type-1 Ø 19 capacity range M2-M16
| | Tapholders diam.19/1 with clutch M2-M16 (unit) |
| | Tapholders diam.19/1 without clutch M3-M16 (unit) |
| | Dieholder M5-M12 19/1 (unit/size) |
| | Long dieholder M6-M12 19/1 (unit/size) |
| | Quick change extension |
| | Reducer cup 19-13 |
| | Clamp |
| | Clamp |
| | Table 500x500 |
| | Table 700x700 |
| | Table 850x850 |
| | Table 1100x850 |
| | Trolley |
| | Column |
| | Pneumatic lifter |
| | Mechanic lifter |
| | Magnetic support (150x150) |
| | Magnetic support (Ø200) |
| | Magnetic support (Ø250) |
| | Arm extension support (1 m.) |
| | Tapholders diam.19/1 with clutch M2-M16 (unit) |
| | Tapholders diam.19/1 without clutch M3-M16 (unit) |
| | Dieholder M5-M12 19/1 (unit/size) |
| | Long dieholder M6-M12 19/1 (unit/size) |
| | Quick change extension |
| | Reducer cup 19-13 |
| | Clamp |
| | Clamp |
| | Table 500x500 |
| | Table 700x700 |
| | Table 850x850 |
| | Table 1100x850 |
| | Trolley |
| | Column |
| | Pneumatic lifter |
| | Mechanic lifter |
| | Magnetic support (150x150) |
| | Magnetic support (Ø200) |
| | Magnetic support (Ø250) |
| | Arm extension support (1 m.) |
